Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Front Seat Outboard Seat Back Airbag (2) - Install
- Front Seat Outboard Seat Back Airbag Nut (1) - Install and tighten [2x] - Fastener Specifications
- Connect the electrical connector.
- Install the connector position assurance (CPA) onto the module electrical connector.
- Return the front seat back cover and pad to the original position.
Front Seat Back Finish Panel (2) - Install
- Return the upper front seat back cover to the original position and install the upper front seat back cover J-channel retainers.
- Front Seat Back Finish Panel Bolt (1) - Install and tighten [4x] - Fastener Specifications
Front Seat Cushion Front Finish Cover (1) - Install
Front Seat Head Restraint (1) - Install
Front Seat Back Upper Cover (1) - Install [2x]
- Enable the SIR System. SIR Disabling and Enabling
- Inflatable Restraint Module Handling and Scrapping
CAUTION:
Refer to Fastener Caution .