Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Refer to SIR Service Precautions .
- Refer to SIR Disabling and Enabling .
- Ignition - On / Vehicle - In Service Mode
- Refer to: Repairs and Inspections Required After a Collision
- Clear DTCs - Use a scan tool.
- Verify DTC B1A33 is not set.
- If the DTC B1A33 is set.
Replace the component: K36 Restraints Control Module
- Go to next step: If the DTC is not set
- If the DTC B1A33 is set.
- All OK.