Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The condition may be intermittent and require driving the vehicle, then reviewing the snapshot to verify resistance parameters do not drop out or spike. Refer to Testing for Intermittent Conditions and Poor Connections
- Verify the appropriate scan tool Deployment Loop Resistance parameters stay consistently between 2.1 and 4.0 Ω for the F101 Instrument Panel Airbag.
- If less than 2.1 or greater than 4.0 Ω
Refer to Circuit/System Testing.
- Go to next step: If within 2.1 and 4.0 Ω without any spikes or dropouts
- If less than 2.1 or greater than 4.0 Ω
- A fault is not currently present and may be an intermittent condition.