Circuit/System Verification

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Ignition - On / Vehicle - In Service Mode
Verify the condition does not exist: Airbag Indicator = Flashing
- If the condition exists
  Refer to: K36 Restraints Control Module: Programming and Setup
- Go to next step: If no condition exists
Verify there are no DTCs set related to the following component/system: K36 Restraints Control Module
- If a related DTC is set
  Refer to: Diagnostic Trouble Code (DTC) List - Vehicle
- Go to next step: If a related DTC is not set
Perform the appropriate scan tool control function: All Indicators @ P16 Instrument Panel Cluster Control Module - On and Off
Verify the component activates: Airbag Indicator = On and Off
- If the component does not work as specified
  Replace the component: P16 Instrument Panel Cluster Control Module
- Go to next step: If the component works as specified
All OK.