Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Catalytic Converter Brace Bracket (3) - Install
- Catalytic Converter Brace Bracket Bolt (2) - Install and tighten [2x] 22 N.m (16 lb ft)
- Catalytic Converter Brace Bracket Nut (1) - Install and tighten [2x] 22 N.m (16 lb ft)
Transmission Fluid Cooler Pipe Nut (1) - Install and tighten 22 N.m (16 lb ft)
- Remove the supports and lower the vehicle.
CAUTION:
Refer to Fastener Caution .