Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Rear Disc Brake Pad Wear Sensor (1) @Rear Disc Brake Inner Pad - Install
Rear Disc Brake Pad Wear Sensor (2) @Retainer (3) - Install [3x]
- Connect the electrical connector. (1)
- Install the right rear tire and wheel assembly. Tire and Wheel Removal and Installation (without J57)
- Remove the support and lower the vehicle.
- Using a scan tool, relearn the rear disc brake pad wear sensor.