Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the fluid from the transfer case. Transfer Case Fluid Replacement
- Front Axle Propeller Shaft - Remove - Front Axle Propeller Shaft Replacement (LSY) , or Front Axle Propeller Shaft Replacement (LGY)
- Propeller Shaft - Remove - Propeller Shaft Replacement (without LT4) , or Propeller Shaft Replacement (AWD)
- Support the transmission with a suitable jack.
Disconnect the electrical connectors. (1)
- Wiring Harness Retainer (2) - Remove [2x]
Transmission Mount (2) - Remove - Transmission Mount Replacement (AWD)
- Using the jack, lower the transmission enough to access the transfer case fasteners.
- Using a suitable transmission jack, support the transfer case.
- Using suitable straps or chains, secure the transfer case to the transmission jack.
Transfer Case Nut (1) - Remove [2x]
Transfer Case Stud (1) - Remove [4x]
- Transfer Case Assembly - Remove