Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation (without J57)
Brake Pipe Fitting (1) - Disconnect
- Cap the brake pipe fitting to prevent brake fluid loss and contamination.
- Brake Hose Retainer (2) - Remove
Brake Hose Fitting Bolt (1) - Remove
- Rear Brake Hose (2) - Remove
- Plug the caliper inlet to prevent brake fluid loss and contamination.
- Rear Brake Hose Fitting Gasket (3) - Remove and DISCARD [2x]