Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Recover the refrigerant. Refrigerant Recovery and Recharging
- NOTE:
Some components not shown for graphic clarity.
Unfasten the engine harness (1) from the air conditioning refrigerant heat exchanger bracket, and position out of the away.
- Unfasten the auxiliary generator battery jumper cable (2) from the lower air conditioning refrigerant heat exchanger bracket stud, and position away.
Air Conditioning Evaporator Hose Clip Nut (1) - Remove
- Front End Sheet Metal Cross Brace - Left Side (3) - Remove - Front End Sheet Metal Cross Brace Replacement (Impact Bar Bracket) , or Front End Sheet Metal Cross Brace Replacement (Plenum with Blackwing)
Air Conditioning Evaporator Thermal Expansion Valve Hose Nut (1) - Remove
- Air Conditioning Refrigerant Heat Exchanger (2) - Remove
- Air Conditioning Evaporator Outlet Tube Seal (3) - Remove and DISCARD
- Air Conditioning Evaporator Inlet Tube Seal (4) - Remove and DISCARD
Air Conditioning Compressor Hose Nut (1) - Remove
- Air Conditioning Refrigerant Heat Exchanger (2) - Remove
- Air Conditioning Compressor Hose Seal (3) - Remove and DISCARD
Air Conditioning Evaporative Connector Hose/Tube and Compressor Hose (2) @ Air Conditioning Condenser - Remove - Air Conditioning Evaporative Connector Hose/Tube and Compressor Hose Replacement (LT4)
Air Conditioning Refrigerant Heat Exchanger (1) - Remove
- Air Conditioning Condenser Hose Seal (2) - Remove and DISCARD