Installation Procedure
Install the air conditioning condenser (1) back into the engine compartment by tilting the left and right side radiator air side baffles outward maneuvering condenser past the baffles.
- CAUTION:
Refer to Fastener Caution .
Air Conditioning Condenser Bracket Bolt (1) - Install and tighten to 6 N.m (53 lb in)
Radiator Air Seal Retainer (2) - Install [2x]
- Air Conditioning Condenser Tube Bolt (2) - Install and tighten to 6 N.m (53 lb in)
Radiator Air Seal Retainer (1) - Install [2x]
Air Conditioning Sealing Washer (2) - Install NEW
- Air Conditioning Refrigerant Heat Exchanger (1) @ Air Conditioning Condenser - Install
Air Conditioning Sealing Washer (2) - Install NEW
- Air Conditioning Evaporative Connector Hose/Tube and Compressor Hose (1) @ Air Conditioning Condenser - Install
Air Conditioning Condenser Tube Clip (2) - Install
- Air Conditioning Compressor Hose Nut (1) @ Air Conditioning Condenser - Install - Air Conditioning Evaporative Connector Hose/Tube and Compressor Hose Replacement (LSY)
Radiator Upper Bracket - Left Side (2) - Install
- Radiator Upper Bracket Bolt (1) - Install [2x] - Radiator Upper Bracket Replacement - Left Side (LGY, LSY)
Radiator Upper Bracket - Right Side (3) - Install
- Radiator Upper Bracket Bolt (2) - Install [2x] - Radiator Upper Bracket Replacement - Right Side (LGY, LSY)
- Retainer (1) - Install
Radiator Air Upper Baffle (1) - Install - Radiator Air Upper Baffle Replacement (LSY)
Radiator Air Upper Baffle Retainer (1) - Install [4x]
- Front Compartment Front Sight Shield - Install - Front Compartment Front Sight Shield Replacement
- Recharge the refrigerant. Refrigerant Recovery and Recharging
- Inspect for refrigerant leaks.
Refer to the procedure link for torque specification.
Refer to the procedure link for torque specification.
Refer to the procedure link for torque specification.