Installation Procedure
- Prior to installing the air conditioning compressor perform the air conditioning compressor oil balancing procedure. Air Conditioning Compressor Oil Balancing
Air Conditioning Compressor (1) - Install
- CAUTION:
Refer to Fastener Caution .
Air Conditioning Compressor Bolt (4) - Install and tighten to 25 N.m (18 lb ft)
- Air Conditioning Compressor Bolt (3) - Install and tighten to 25 N.m (18 lb ft)
- Air Conditioning Compressor Stud (2) - Install and tighten to 9 N.m (80 lb in)
- Air Conditioning Compressor Nut (1) - Install and tighten to 22 N.m (16 lb ft)
- Air Conditioning Compressor Belt - Install - Air Conditioning Compressor Belt Replacement
- Supercharger Belt Tensioner Bracket - Install - Supercharger Belt Tensioner Bracket Replacement
Engine and Transmission Wiring Harness Bracket (2) - Install
- Engine Wiring Harness Bolt (1) - Install and tighten to 22 N.m (16 lb ft)
Air Conditioning Evaporative Connector Hose/Tube and Compressor Hose @ Air Conditioning Compressor (1) - Install - Air Conditioning Evaporative Connector Hose/Tube and Compressor Hose Replacement (LT4)
Air Conditioning Refrigerant Heat Exchanger (1) @ Air Conditioning Condenser - Install - Air Conditioning Refrigerant Heat Exchanger Replacement (LT4)
Air Conditioning Evaporative Connector Hose/Tube and Compressor Hose (2) @ Air Conditioning Condenser - Install - Air Conditioning Evaporative Connector Hose/Tube and Compressor Hose Replacement (LT4)
- Recharge the refrigerant. Refrigerant Recovery and Recharging
- Inspect for refrigerant leaks.