Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

NOTE:
Verify the NEW sensor is equipped with a NEW O-ring, DO NOT reuse the old O-ring seal.

Install the manual transmission output speed sensor (2).

CAUTION:

Refer to Fastener Caution .

Install the vehicle speed sensor bolt (1) and tighten to 10 N.m (89 lb in).
Courtesy of GENERAL MOTORS COMPANY

Connect the manual transmission output speed sensor electrical connector (2).
Lower the vehicle.