Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the transmission control from the vehicle. Manual Transmission Control Replacement
Disconnect the manual transmission gear position sensor electrical connector (1).
- Remove the 4 manual shift shaft position switch bolts (2).
- Remove the manual transmission gear position sensor assembly (4) from the transmission.
- Remove the manual transmission gear position sensor seal.
NOTE:
Do Not remove manual transmission gear position sensor (4) from the mounting plate (3). These components are serviced as a assembly.