Special Tools

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

DT-51196 Seal Installer

Equivalent regional tools: Special Tools

Courtesy of GENERAL MOTORS COMPANY

Using DT-51196-1 Seal Protector (1), and DT-51196-2 Seal Pusher (2), install NEW torque converter fluid seal (3).

CAUTION:

Size the fluid seal rings for at least 5 minutes after installation to obtain proper seal ring size. Failure to do so may cause internal transmission leaks and transmission damage.

Use the large taper side of DT-50912-1 Seal Sizer (4) for initial torque converter fluid seal (3) sizing, then flip the tool over for final sizing.

NOTE:

Ensure fluid seal ring is installed properly as shown.

1-3-5-6-7 Clutch Fluid Seal Ring (5) - Install NEW [2x]