Special Tools

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

DT-26941 Bushing and Bearing Remover
DT-38734 Intermediate Spring Compressor Adapter
DT-45124 Removal Bridge

Equivalent regional tools: Special Tools

Courtesy of GENERAL MOTORS COMPANY

Turbine Shaft Retaining Ring (1) - Remove and DISCARD
Turbine Shaft (2) - Remove

CAUTION:

Refer to Seal Reuse Caution .

Turbine Shaft Seal (3) - Remove and DISCARD
Turbine Shaft Fluid Seal Ring (4) - Remove and DISCARD [4x]
Turbine Shaft Fluid Seal Ring (5) - Remove and DISCARD [3x]
Turbine Shaft Seal (6) - Remove and DISCARD
Courtesy of GENERAL MOTORS COMPANY

Use the DT-38734 Intermediate Spring Compressor Adapter (1) and a press to remove the 1-3-5-6-7 Clutch Piston Dam Retaining Ring (2).
1-3-5-6-7 Clutch Piston Dam Retaining Ring (2) - Remove and DISCARD
1-3-5-6-7 Clutch Piston Dam (3) - Remove
1-3-5-6-7 Clutch Piston Return Spring (4) - Remove
Courtesy of GENERAL MOTORS COMPANY

1-3-5-6-7 Clutch Backing Plate Retaining Ring (1) - Remove
1-3-5-6-7 Clutch Backing Plate (2) - Remove
1-3-5-6-7 Clutch Plate - Friction (3) - Remove [5x]
1-3-5-6-7 Clutch Plate (4) - Remove [5x]
Courtesy of GENERAL MOTORS COMPANY

1-3-5-6-7 Clutch Piston (1) - Remove
1-3-5-6-7 Clutch Piston Dam Seal (2) - Remove and DISCARD
1-3-5-6-7 Clutch Piston Seal- Inner (3) - Remove and DISCARD
1-3-5-6-7 Clutch Piston Seal- Outer (4) - Remove and DISCARD
Courtesy of GENERAL MOTORS COMPANY

Use the DT-26941 Bushing and Bearing Remover (1) & DT-45124 Removal Bridge (2) to remove the 1-3-5-6-7 Clutch Thrust Bearing (3).
1-3-5-6-7 Clutch Thrust Bearing (3) - Remove