1-2-7-8 Reverse Clutch Piston Installation

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

DT-35512 Bearing Installer
DT-48056 Spring Compressor Bridge
DT-50902 Adjustable Clutch Spring Compressor

Equivalent regional tools: Special Tools

Courtesy of GENERAL MOTORS COMPANY

1-2-7-8-Reverse Clutch Apply Ring (1) - Install
1-2-7-8-Reverse Clutch Return Spring (2) - Install
1-2-7-8-Reverse Clutch Piston (3) - Install
1-2-7-8-Reverse Clutch Piston Housing (4) - Install
The opening of the retaining ring should be in the 9 o'clock position as indicated by the arrow.
Assemble special tools as shown to install retaining ring.
1-2-7-8-Reverse Clutch Piston Housing Retaining Ring (5) - Install