LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 231 (HVAC - Automatic) >> Repair Instructions >> Inside Air Moisture and Windshield Temperature Sensor Replacement (without CE1) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Refer to Glass and Sheet Metal Handling Warning .

  1. GM5330333Courtesy of GENERAL MOTORS COMPANY

    Windshield Multifunction Sensor Mount Bracket Cover Insert (1) - Remove

  2. GM5330339Courtesy of GENERAL MOTORS COMPANY

    Using a suitable plastic trim tool, carefully pry downward on the windshield multifunction sensor mount bracket cover (1) to release it from the windshield.

  3. Pull downward to remove the windshield multifunction sensor mount bracket cover (1) from the windshield.
  4. GM5432140Courtesy of GENERAL MOTORS COMPANY

    Inside Rearview Mirror Bolt (1) - Remove

  5. Inside Rearview Mirror (2) - Remove
  6. Disconnect the electrical connector.
  7. GM5323869Courtesy of GENERAL MOTORS COMPANY

    Inside Air Moisture and Windshield Temperature Sensor (1) - Remove

  8. Disconnect the electrical connector.
scientia non olet · About LEMON Manuals