Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Install the appropriate Air Conditioning Service Center, ignition ON
- Verify the high side pressure on the gauge is within 10% of the scan tool A/C High Side Pressure Sensor parameter.
- If the A/C High Side Pressure Sensor parameter is not within 10%
Refer to Circuit/System Testing.
- Go to next step: If the A/C High Side Pressure Sensor parameter is within 10%
- If the A/C High Side Pressure Sensor parameter is not within 10%
- Verify the A/C High Side Pressure Sensor parameter is between 269-2929 kPa (39-425 PSI).
- If the reading is not between 269-2929 kPa (39-425 PSI)
- Go to next step: If the reading is between 269-2929 kPa (39-425 PSI)
- All OK