Conditions for Running the DTC
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
B2B09
- The BCM is awake and communicating
- The actuator has been commanded to move
- System voltage = 9 - 15 V
- DTCs B2B2E, B2B2F, B2B30 or U065D are not set
B2B2E, B2B2F
- The BCM is awake and communicating
- Actuator learn has been initiated
- System voltage = 9 - 15 V
- DTCs B2B30 or U065D is not set
B2B30
- The BCM is awake and communicating
- System voltage greater than 11 V
- Vehicle Power Mode = Run