Conditions for Running the DTC
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
B2B05
- The BCM is awake and communicating
- The actuator has been commanded to move
- System voltage = 9 - 15 V
- DTCs B2B28, B2B29, B2B2A or U0659 are not set
B2B28, B2B29
- The BCM is awake and communicating
- Actuator learn has been initiated
- System voltage = 9 - 15 V
- DTCs B2B2A or U0659 are not set
B2B2A
- The BCM is awake and communicating
- System voltage greater than 11 V
- Vehicle Power Mode = Run