Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON/ Vehicle in Service Mode.
- Verify no DTCs are set
- If any DTCs are set
- Go to next step: If no DTCs are set
- Verify the BCM Blower Motor Speed Request parameter changes each time the blower motor speed control switch is pressed.
- If the Blower Motor Speed Request parameter does not change each time the blower motor speed control switch is pressed.
Replace the A26 Heater and Air Conditioning User Interface Controls - Front.
- Go to next step: If the Blower Motor Speed Request parameter changes each time the blower motor speed control switch is pressed.
- If the Blower Motor Speed Request parameter does not change each time the blower motor speed control switch is pressed.
- Verify the blower motor operates properly with the blower motor speed control switch in each speed position.
- If the blower motor does not operate properly in each position
Refer to Circuit/System Testing.
- Go to next step: If the blower motor operates properly in each position
- If the blower motor does not operate properly in each position
- A fault is not currently present and may be an intermittent condition.