LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Engine Mechanical - 2.0L (LSY) - Repair Instructions (1 Of 3)) >> Repair Instructions >> Engine Wiring Harness Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil fill cap.
  2. GM5335087

    Lift up on the front of the intake manifold cover (1).

  3. GM5335089

    Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Remove

  4. GM5336345

    Retainer (1) - Unclip [5x]

  5. Engine Wiring Harness (2) - Reposition away
  6. GM5336351

    Engine Wiring Harness Conduit Bracket Bolt (1) - Remove

  7. Engine Wiring Harness Conduit Nut (2) - Remove
  8. Engine Wiring Harness Bracket (3) - Remove
scientia non olet · About LEMON Manuals