LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Engine Mechanical - 2.0L (LSY) - Repair Instructions (1 Of 3)) >> Repair Instructions >> Engine Wiring Harness Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5336351

    Engine Wiring Harness Bracket (3) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Engine Wiring Harness Conduit Nut (2) - Install and tighten - Fastener Specifications
  3. Engine Wiring Harness Conduit Bracket Bolt (1) - Install and tighten - Fastener Specifications
  4. GM5336345

    Engine Wiring Harness (2) - Reposition

  5. Retainer (1) - Install [5x]
  6. GM5335089

    Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Install

  7. GM5335087
    NOTE:

    Ensure the engine sight shield retainers fully engage the intake manifold cover studs.

    Push down on the front of the intake manifold cover (1) engaging the intake manifold cover retainers to the intake manifold cover studs.

  8. Install the oil fill cap.
scientia non olet · About LEMON Manuals