LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Engine Mechanical - 2.0L (LSY) - Repair Instructions (1 Of 3)) >> Repair Instructions >> Crankshaft Balancer Replacement >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5044133

    Inspect the crankshaft balancer for the following:

    • Worn or damaged hub-to-crankshaft surface (1)
    • Worn, grooved or damaged hub seal surface (2)

      A crankshaft balancer hub seal surface with excessive scoring, grooves, rust or other damage must be replaced.

    • Worn, chunking or deteriorated rubber between the hub and pulley (3)
    • Damaged drive belt ribs (4)
    • Damaged webs (5)
scientia non olet · About LEMON Manuals