Inspection Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Inspect the flex plate for the following conditions:
- Stress cracks around the flex plate-to-torque converter mounting bolt hole locations (1) and flex plate-to-crankshaft (2, 4)
- Cracks at welded areas that retain the ring gear onto the flex plate (3)
- Damaged or missing ring gear teeth (5)
NOTE:Do not attempt to repair the welded areas that retain the ring gear to the flex plate. Install a NEW flex plate.
- Replace the flex plate as necessary.