Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition/Vehicle - Off = 10 s - Brake Pedal = Not applied
- Ignition - On / Vehicle - In Service Mode
- Perform the scan tool control function: Brake Hydraulics Test
- Verify DTC C0021 is not set.
- If DTC C0021 is set
Replace the component: A104 Brake Master Cylinder
- Go to next step: If the DTC is not set
- If DTC C0021 is set
- All OK.