Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Verify all other Transmission related faults are not present.
- If Transmission related faults are present
- Go to next step: If Transmission related faults are not present
- Verify the K20 Engine Control Module software is up to date.
- If software is not up to date
Program the K20 Engine Control Module.
- Go to next step: If software is up to date
- If software is not up to date
- Verify none of the DTCs set.
- If DTCs set
Replace the K212 Gear Shift Control Module
- Go to next step: If DTCs are not set
- If DTCs set
- Verify none of the DTCs set while operating the vehicle within the Conditions for Running the DTC.
- If DTCs set
Replace the K20 Engine Control Module
- Go to next step: If DTCs do not set
- If DTCs set
- All OK.