Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Verify all other Transmission related faults are not present.
- If Transmission related faults are present
- Go to next step: If Transmission related faults are not present
- Check for updated software in K71 Transmission Control Module.
- If software is not current
Perform the programming and learn procedure for the K71 Transmission Control Module.
- Go to next step: If software is up to date
- If software is not current
- Check for updated software in K20 Engine Control Module.
- If software is not current
Perform the programming for the K20 Engine Control Module.
- Go to next step: If software is up to date
- If software is not current
- Replace the K71 Transmission Control Module
- Verify above mentioned DTC's are not set.
- If above mentioned DTC's are set
Replace the K20 Engine Control Module
- Go to next step: If above mentioned DTC's are not set
- If above mentioned DTC's are set
- All OK.