Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Parking Assist Alarm Sensor Ring - Rear (1) - Install
- NOTE:
Ensure the silicone decoupling ring is installed on the sensor to avoid sensor failure.
Insert the parking assist alarm sensor (1) into the housing.
- Connect the electrical connector.
Rear Bumper Fascia (1) - Install - Rear Bumper Fascia Removal and Installation (without Blackwing) , or Rear Bumper Fascia Removal and Installation (with Blackwing)