Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

NOTE:
Ensure the silicone decoupling ring is installed on the sensor to avoid sensor failure.

Parking Assist Alarm Sensor - Front Outboard (1) - Install
Connect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
The front bumper fascia will rest in place by guides on the center support upper structure.

With the aid of an assistant install the fascia. (1) - Front Bumper Fascia Removal and Installation (without Blackwing) , or Front Bumper Fascia Removal and Installation (with Blackwing) , or Front Bumper Fascia Removal and Installation (with Blackwing CFV, CFZ)