Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Front Parking Assist Alarm Sensor Bracket (1) - Install
- NOTE:
Ensure the silicone decoupling ring is installed on the sensor to avoid sensor failure.
Insert the parking assist alarm sensor (1) into the housing.
- Connect the electrical connector.
- NOTE:
The front bumper fascia will rest in place by guides on the center support upper structure.
With the aid of an assistant install the fascia. (1) - Front Bumper Fascia Removal and Installation (without Blackwing) , or Front Bumper Fascia Removal and Installation (with Blackwing) , or Front Bumper Fascia Removal and Installation (with Blackwing CFV, CFZ)