LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Parking Assistance Systems) >> Diagnostic Information and Procedures >> DTC B19BB-B19BE >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

B19BB 11, B19BC 11, B19BD 11, B19BE 11 

The K182 Parking Assist Control Module has determined signal circuit 5215, 5216, 5217, or 5218 is shorted to ground

B19BB 12, B19BC 12, B19BD 12, B19BE 12 

The K182 Parking Assist Control Module has determined the voltage on signal circuit 5215, 5216, 5217, or 5218 is high

B19BB 13, B19BC 13, B19BD 13, B19BE 13 

The K182 Parking Assist Control Module has determined the signal circuit 5215, 5216, 5217, or 5218 is open

B19BB 16, B19BC 16, B19BD 16, B19BE 16 

The K182 Parking Assist Control Module has determined the signal circuit 5215, 5216, 5217, or 5218 is shorted to ground or open

B19BB 29, B19BC 29, B19BD 29, B19BE 29 

The K182 Parking Assist Control Module has received an invalid signal.

B19BB 4A, B19BC 4A, B19BD 4A, B19BE 4A 

The K182 Parking Assist Control Module determines the wrong sensor type is installed.

B19BB 92, B19BC 92, B19BD 92, B19BE 92 

The K182 Parking Assist Control Module determines poor signal performance