Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify DTC B1A30 is not set.
- If DTC B1A30 is set
Refer to DTC B1A30 (UD5) .
- Go to next step: If DTC B1A30 is not set
- If DTC B1A30 is set
- Verify DTC B132B 12, B132C 12, B132D 12, or B132E 12 is not set.
- If DTC B132B 12, B132C 12, B132D 12, or B132E 12 is set
- Verify the appropriate B306 Parking Assist Alarm Sensors are not contaminated with snow, mud, dirt, slush, or ice.
- If contaminated, clean the B306 Parking Assist Alarm Sensors.
- Go to next step: If there is no contamination
- Refer to Circuit/System Testing.
- Go to next step: If DTC B132B 12, B132C 12, B132D 12, or B132E 12 is not set
- Verify DTC B132B 4A, B132C 4A, B132D 4A or B132E 4A is not set.
- If DTC B132B 4A, B132C 4A, B132D 4A or B132E 4A is set
Replace the appropriate B306 Parking Assist Alarm Sensor with the correct sensor type.
- Go to next step: If DTC B132B 4A, B132C 4A, B132D 4A or B132E 4A is not set
- If DTC B132B 4A, B132C 4A, B132D 4A or B132E 4A is set
- Refer to Circuit/System Testing.