LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 198 (Engine Mechanical - 3.6L (LF4) - Repair Instructions (3 Of 4)) >> Repair Instructions >> Cylinder Head Replacement - Right Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3707163

    Install the fuel injection fuel rail noise shield-lower (1).

  2. GM2202034

    Ensure the cylinder head locating pins are securely mounted in the cylinder block deck face.

  3. Cylinder Head Gasket (1) - Install NEW
  4. GM2202033

    Align the right cylinder head (3) with the deck face locating pins and install.

  5. Cylinder Head Bolt (1) - Install NEW and hand tighten [8x]
  6. Cylinder Head Bolt (2) - Install NEW and hand tighten
    7. CAUTION:

    Refer to Torque-to-Yield Fastener Caution .

  7. Cylinder Head Bolt (1, 2) - Tighten in sequence - Fastener Specifications
  8. GM5880449

    Turbocharger Gasket (2) - Install NEW

  9. Compressor Air Intake Turbocharger (1) - Remove
  10. GM5880448
    CAUTION:

    Refer to Fastener Caution .

    Turbocharger Bolt (1) - Install and tighten in sequence [4x] - Fastener Specifications

  11. GM5892103

    Turbocharger Coolant Feed Pipe (3) @ Compressor Air Intake Turbocharger - Install

  12. Turbocharger Coolant Feed and Return Pipe Gasket (2) - Install NEW [2x]
  13. Turbocharger Coolant Feed and Return Pipe Bolt (1) - Install and tighten - Fastener Specifications
  14. GM5875520
    NOTE:

    Some components not shown for graphic clarity.

    Turbocharger Oil Return Pipe Gasket (2) - Install NEW [2x]

  15. Turbocharger Oil Return Pipe (1) - Install
  16. GM5875517
    NOTE:

    Some components not shown for graphic clarity.

    Turbocharger Oil Return Pipe Bolt (1) - Install and tighten [4x] - Fastener Specifications

  17. GM5875574
    NOTE:

    Some components not shown for graphic clarity.

    Turbocharger Oil Feed Pipe (4) - Install

  18. Turbocharger Oil Feed Pipe Washer (3) - Install NEW [2x]
  19. Turbocharger Oil Feed Pipe Bolt (2) - Install and tighten - Fastener Specifications
  20. Turbocharger Oil Feed Pipe Fitting Clip (1) - Install
  21. GM5873812

    Turbocharger Coolant Return Pipe (3) - Install

  22. Turbocharger Coolant Feed and Return Pipe Gasket (2) - Install NEW [2x]
  23. Turbocharger Coolant Feed and Return Pipe Bolt (1) - Install and tighten - Fastener Specifications
  24. GM5873832

    Retaining Clip (1) - Install

  25. GM5876059

    Turbocharger Heat Shield (1) - Install

  26. GM5873866

    Turbocharger Heat Shield Bolt (1) - Install and tighten [3x] - Fastener Specifications

  27. GM5876046

    Engine Front Cover (1) - Install - Engine Front Cover Removal and Installation

  28. Fill the engine oil to the proper level with NEW engine oil. Engine Oil and Oil Filter Replacement
scientia non olet · About LEMON Manuals