Special Tools
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
J-45201-3
Cooler Line Seal Remover
Equivalent regional tools: Special Tools
 Courtesy of GENERAL MOTORS COMPANY
|
Manual Shift Shaft Pin (1) - Remove and DISCARD
- Manual Shift Shaft (2) - Remove
- Park Release Lever (3) - Remove
- Park Pawl Actuator Assembly (4) - Remove
 Courtesy of GENERAL MOTORS COMPANY
|
Park Pawl Actuator Guide Pin (1) - Remove and DISCARD
- Push the park pawl away from the park pawl actuator guide to remove the Park Pawl Actuator Guide Assembly from the case.
- Park Pawl Actuator Guide Assembly (2) - Remove
 Courtesy of GENERAL MOTORS COMPANY
|
Attach the J-45201-3
Cooler Line Seal Remover (1) to the Transmission Fluid Cooler Pipe Fitting Seal (2).
- Transmission Fluid Cooler Pipe Fitting Seal (2) - Remove and DISCARD [2x]