LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (Engine Mechanical - 2.7L (L3B) - Repair Instructions (2 Of 3)) >> Repair Instructions >> Upper Intake Manifold Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5457786

    Upper Intake Manifold Bracket (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  3. Intake Manifold Brace Nut (1) - Install and tighten [2x] - Fastener Specifications
  4. GM5457857

    Radiator Surge Tank Inlet Hose Clip (2) @ Upper Intake Manifold Bracket (3) - Install

  5. Intake Manifold Brace Nut (1) - Install and tighten [2x] - Fastener Specifications
  6. GM5457059

    Wiring Harness (2) - Reposition

  7. Electrical Connector (1) - Connect [5x]
  8. GM5515361

    Retainer (1) @ Upper Intake Manifold Bracket (2) - Connect [2x]

  9. GM5456829
    NOTE:

    Ensure the intake manifold cover insulator retainers fully engage the intake manifold cover studs.

    Intake Manifold Cover Insulator (1) - Install

  10. GM5456746

    Intake Manifold Cover Bolt (1) - Install - Fastener Specifications

  11. GM5432174

    Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Install

  12. GM5432171

    Push down on the front of the intake manifold cover (2).

  13. Intake Manifold Cover Bolt (1) - Install [2x] - Fastener Specifications
  14. Install the oil fill cap.
scientia non olet · About LEMON Manuals