Circuit/System Description
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
For an overview of the component/system, refer to: Compressor Air Intake Turbocharger System Description
| Circuit | Description |
|---|---|
| 5 V Reference | Regulated voltage supplied by the control module. |
| Signal | The control module input circuit has an internal resistance connected to 5 V. |
| Low Reference | Grounded through the control module. |
| Component | Description |
|---|---|
| B111 Turbocharger/Supercharger Boost Pressure Sensor | The sensor measures the pressures between the turbocharger and the throttle body. When the engine is off or idling, the boost pressure should be the same as the barometric pressure. Under wide-open throttle conditions the pressure will increase considerably. |
| K20 Engine Control Module | The control module contains a microprocessor used to process input data to control outputs. The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly. |