Component Testing
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition/Vehicle - Off
- Disconnect the appropriate electrical connector: M129 Intake Camshaft Profile Actuator or M130 Exhaust Camshaft Profile Actuator
- Test for 3 to 5 ohms between the test points: Control terminal 1/6 & Ignition terminal 5
- If not between 3 and 5 ohms
Replace the component: M129 Intake Camshaft Profile Actuator or M130 Exhaust Camshaft Profile Actuator
- Go to next step: If between 3 and 5 ohms
- If not between 3 and 5 ohms
- All OK.