Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON/Vehicle In Service Mode.
- Verify that DTC U1625 is not set.
- If the DTC is set by K124AB Image Processing Module 1 - Processor 2
Replace the K124 Image Processing Module.
- If the DTC is set by K179 Automated Driving Mapping Module
Refer to Circuit/System Testing - Testing.
- Go to next step: If the DTC is not set
- If the DTC is set by K124AB Image Processing Module 1 - Processor 2
- A fault is currently not present and may be an intermittent condition.