Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Verify DTC C2A1D is not set.
- If the DTC is set
- Verify the condition does not exist: Left and Right Park Brake Actuator Status = Service Release
- If a condition exists
Perform the control function: Deactivate Rear Park Brake Service Position.
- Go to next step: If no condition exists
Go to next step: Perform the following learn procedure: Park Brake Calibration
- If a condition exists
- Go to next step: If the DTC is not set
- All OK.