Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Disable the SIR system. SIR Disabling and Enabling
Courtesy of GENERAL MOTORS COMPANY

Use a flat bladed plastic trim tool to depress the steering wheel airbag access hole cover detents to remove the 2 steering wheel airbag access hole covers (1).
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Airbag Bolt (1) - Remove [2x]
Release the connector position assurance (CPA) retainer.
Disconnect the electrical connectors.
Steering Wheel Airbag (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Loosen the steering wheel bolt (1) so that 2 - 3 threads are engaged.
Wiggle the steering wheel until the wheel disengages completely.
Steering Wheel Bolt (1) - Remove
Steering Wheel (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Bolt (1, 2) - Remove [10x]
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connectors.
Steering Wheel Shroud (1) - Remove [3x]
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Bolt (1) @ Ride Control Switch - Remove [2x]
Disconnect the electrical connector. (2)
Courtesy of GENERAL MOTORS COMPANY

Ride Control Switch (1) - Remove