LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Engine Mechanical - 2.7L (L3B) - Repair Instructions (1 Of 3)) >> Repair Instructions >> Powertrain Mount Balancing

Powertrain Mount Balancing

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5400941

    Engine Mount Nut (1) - Loosen

  2. GM5400943

    Engine Mount Nut (1) - Loosen

  3. GM5336524

    Transmission Mount Bracket Bolt (1) - Loosen [4x]

  4. Transmission Mount Bolt (2) - Loosen
  5. Shake the powertrain vigorously from front to rear and allow the powertrain to settle.
  6. GM5336524

    Transmission Mount Bolt (2) - Tighten - Transmission Mount Replacement (All Wheel Drive) , or Transmission Mount Replacement (Rear Wheel Drive) , or Transmission Mount Replacement (Black Wing)

  7. Transmission Mount Bracket Bolt (1) - Tighten [4x] - Transmission Mount Replacement (All Wheel Drive) , or Transmission Mount Replacement (Rear Wheel Drive) , or Transmission Mount Replacement (Black Wing)
  8. GM5400943

    Engine Mount Nut (1) - Tighten - Drivetrain and Front Suspension Cradle Removal and Installation (AWD) , or Drivetrain and Front Suspension Cradle Removal and Installation (RWD) , or Drivetrain and Front Suspension Cradle Removal and Installation (Blackwing)

  9. GM5400941

    Engine Mount Nut (1) - Tighten - Drivetrain and Front Suspension Cradle Removal and Installation (AWD) , or Drivetrain and Front Suspension Cradle Removal and Installation (RWD) , or Drivetrain and Front Suspension Cradle Removal and Installation (Blackwing)

scientia non olet · About LEMON Manuals