LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Engine Mechanical - 2.7L (L3B) - Repair Instructions (1 Of 3)) >> Repair Instructions >> Drive Belt Tensioner Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil fill cap.
  2. GM5432171

    Intake Manifold Cover Bolt (1) - Remove [2x]

  3. Lift up on the front of the intake manifold cover (2).
  4. GM5432174

    Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Remove

  5. GM5156329

    Using an appropriate tool, rotate the drive belt tensioner (1) counterclockwise and hold tension.

  6. Accessory Drive Primary Belt (2) - Remove
  7. Slowly release tension on the drive belt tensioner (1).
  8. GM5500497

    Belt Idler Pulley (1) - Remove

  9. GM5500583

    Drive Belt Tensioner Bolt (1) - Remove [2x]

  10. Drive Belt Tensioner (2) - Remove
scientia non olet · About LEMON Manuals