LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Engine Mechanical - 2.7L (L3B) - Repair Instructions (1 Of 3)) >> Repair Instructions >> Balancer Chain Guide Replacement >> Cleaning and Inspection Procedure - Required

Cleaning and Inspection Procedure - Required

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5044132

    Clean the automatic transmission flex plate (1) in solvent.

    2. WARNING:

    Refer to Safety Glasses and Compressed Air Warning

  2. Dry the automatic transmission flex plate with compressed air.
  3. Inspect the automatic transmission flex plate for the following conditions:
    1. Stress cracks around the automatic transmission flex plate-to-torque converter mounting bolt hole locations (1) and/or automatic transmission flex plate-to-crankshaft (2, 4)
      2. NOTE:

      Do not attempt to repair the welded areas that retain the ring gear to the automatic transmission flex plate. Install a NEW automatic transmission flex plate.

    2. Cracks at welded areas that retain the ring gear onto the automatic transmission flex plate (3)
    3. Damaged or missing ring gear teeth (5)
  4. If any of the above conditions exist, replace the automatic transmission flex plate.
scientia non olet · About LEMON Manuals