LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Engine Mechanical - 2.0L (LSY) - Repair Instructions (2 Of 3)) >> Repair Instructions >> Upper Intake Manifold Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5137016

    Upper Intake Manifold Bracket (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Upper Intake Manifold Cover Nut (1) - Install and tighten [2x] 9 N.m (80 lb in)
  3. GM5137013

    Upper Intake Manifold Cover Bracket Bolt (1) @ Upper Intake Manifold Bracket (2) - Install and tighten [2x] 9 N.m (80 lb in)

  4. GM5137012

    Wiring Harness (4) - Reposition

  5. Retainer (2) @ Upper Intake Manifold Bracket (3) - Install [3x]
  6. Electrical Connector (1) - Connect [3x]
  7. GM5335089

    Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Install

  8. GM5335087
    NOTE:

    Ensure the engine sight shield retainers fully engage the intake manifold cover studs.

    Push down on the front of the intake manifold cover (1).

  9. Install the oil fill cap.
scientia non olet · About LEMON Manuals