Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the engine oil.
Remove wiring harness retainer.
- Lower Oil Pan Bolt (1) - Remove [18x]
- Use the lower oil pan bolts in the provided jack screw (threaded inserts) in the oil pan. Tighten the jack screw by hand 1 to 2 turn each uniformly and move to the next screw until the oil pan has full separation from the LCE.
- Use care not to damage the LCE sealing surface.
- Lower Oil Pan (2) - Remove
NOTE: