Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection
Battery Distribution Engine Compartment Fuse Block Cover (1) - Remove
- Battery Positive Cable Nut (6) - Remove
- Battery Positive Cable (7) - Remove
- Auxiliary Generator Battery Jumper Cable Nut (5) - Remove
- Auxiliary Generator Battery Jumper Cable (8) - Remove
- Engine Wiring Harness Terminal Nut (4) - Remove
- Engine Wiring Harness Terminal Nut (3) - Remove
- Engine Wiring Harness (9) - Remove [2x]
- Forward Lamp Wiring Harness Terminal Nut (2) - Remove [2x]
- Forward Lamp Wiring Harness (10) - Remove [2x]
Retaining Tab (1) - Disengage [2x]
- Battery Distribution Engine Compartment Fuse Block (2) - Remove
Battery Positive Cable Nut (1) - Remove
- Auxiliary Generator Battery Jumper Cable (2) - Remove
- Battery Positive Cable (3) - Remove
Retaining Tab (1) - Disengage [2x]
- Engine Wiring Harness Fuse Block Cover (2) - Remove
Engine Wiring Harness Junction Block Bolt (1) - Remove
- Retaining Tab (3) - Disengage [4x]
- Engine Wiring Harness Junction Block (2) - Remove
Disengage the 2 retaining covers (2), and remove the electrical connectors (1).
Disengage the 3 retaining tabs (1), from the body wiring harness junction block bracket (3), and remove the engine wiring harness fuse block bracket (2).
Remove harness retainers as needed.
- Body Wiring Harness Fuse Block Bracket Bolt (1) - Remove [2x]
- Body Wiring Harness Junction Block Bracket (2) - Remove