Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- If adhesive residue is present on the rear side door window belt reveal molding, clean molding using a acetone based cleaner on a lint free cloth.
Press firmly to install the rear side door window belt reveal molding (1) on the door flange.
- CAUTION:
Refer to Fastener Caution .
Rear Side Door Window Belt Reveal Molding Bolt (1) - Install and tighten [2x] - Fastener Specifications
- Inspect the window for proper operation.