Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- If adhesive residue is present on the front side door window belt reveal molding, clean molding using a acetone based cleaner on a lint free cloth.
Install by pressing down firmly on the front side door window belt reveal molding (2) until seated to the pinch-weld flange on the door panel.
- Front Side Door Window Belt Reveal Molding (2) - Install
- Front Side Door Window Belt Reveal Molding Bolt (1) - Install and tighten [2x] - Fastener Specifications
Outside Rearview Mirror Housing (2) - Install
- Outside Rearview Mirror Nut (1) - Install and tighten [3x] - Fastener Specifications
- Connect all electrical connectors.
Ensure that the door weatherstrip is not trapped below the window garnish molding (2) once completely installed. Reposition the weatherstrip as necessary.
- Front Side Door Window Garnish Molding (2) - Install
- Front Side Door Window Garnish Molding Retainer (1) - Install [2x]
Front Side Door Trim (4) - Install - Front Side Door Trim Removal and Installation
- Inspect the outside rearview mirror for proper operation.
CAUTION:
Refer to Fastener Caution .