Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Verify the timing components are correctly aligned for stage 2. Timing Chain Alignment Diagram
- If not in stage 2 position use the EN-48589 Crankshaft Rotation Socket (1) rotate the crankshaft and crankshaft sprocket to stage 2 alignment position.
Timing Chain Guide (2) - Install
- Timing Chain Guide Bolt (1) - Install and tighten [2x] - Fastener Specifications
Timing Chain Tensioner Gasket (3) - Install NEW
- Timing Chain Tensioner (2) - Install
- Timing Chain Tensioner Bolt (1) - Install and tighten [2x] - Fastener Specifications
Remove the EN-46112 Tensioner Retraction Pin (2) to release timing chain tensioner plunger (1).
Remove the EN-48383 - 3 Camshaft Retaining Tool (1).
Engine Front Cover (1) - Install - Engine Front Cover Removal and Installation
CAUTION:
Refer to Fastener Caution .